What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 19.06.2025 13:12

but I think this circuit , shows a few more pieces.
so, what happens?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
What are 10 interesting facts about you?
These are simplified answers to the original question, and does not change anything I wrote above.
One
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
But it can get overloaded, and no longer works.
The other is “what does a “fuse” do?”
Popular home goods retailer files for bankruptcy, plans to close 26 stores initially - 10TV
a photo is worth a thousand words.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
These devices are installed between the “hot” and “neutral” and protective ground.
Can bosses get fired for being too hard on employees?
There are two important concepts here.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
What are 5 ways that can be done by the community to improve the public transport system?
This device then solves the entire problem.
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–14 [Omar Gharbi Omar Gharbi ]
He then describes the function of a fuse.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
nine
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–16 [ OO OLAOYE OYEBODE ]
An AC voltage/ current source, and an ac inductive load.
One is “what exactly is in a ‘surge protector’ ? ”
In schematic diagrams this is the symbol for a fuse:
Yankees To Reinstate Giancarlo Stanton - MLB Trade Rumors
I post the exact comment here.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
What is the estimated number of people with an extra X chromosome?
Barnstars:
This is where this question deviates from being a 'generic' question, and becomes more specific.
eight
Why do girls in Indian top colleges wear shorts?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
A circuit breaker is similar, but is resettable.
A fuse is a non-resetable over current circuit protector.
For this case there are devices called Metal oxide varistors (MOV).
So, the voltage could go up to 500 volts, and the fuse will not open up.
what exactly is a ‘surge’ protector?
Now when you have a certain ac resistance, then a current flows in a loop.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Upvotes:
At one ohm, the resistor has a maximum of 1 watt power.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Edit 2024–10.
the problem then depends on "how fast does the fuse operate?".
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
[image of Common-mode choke]
It also is a device that limits the change in current flow.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
The bolt then partially travels down the line to your home.
but this device (an Inductor) … impedes the rapid changes in the current.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–10[John johnson John Johnson ]
What does a fuse do?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
But… the neutral is now “floating” because of the 1 ohm resistance.
He then describes Rainy Season and Lightning.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
At least they know the answer if they wanted it.
Here is a simplified AC power diagram.
This is where the MOV conducts again, and dissipated the energy.
There are three different concepts here that are getting confused.
(Dc diagram shown, AC is similar).
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
What is lightning?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is 'the assistant's answer'
He then asserts :
The third is lightning and “how it gets conducted into a home.”
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Because the load is inductive, the current lags the voltage.(by a bit).
First Sentence:
This one hit behind the barn.
It seems Mohan does not understand the difference between a comment and an Answer.
[old diagram got deleted by accident]